||1" aluminum. 1/4" glass
- Jewelry Case - jewelry showcases are designed with a small glass viewing area at the top which is especially beneficial for smaller objects (as they can be seen at the top without have to bend down). A single row of viewing area will also keep the customer’s focus on the products being displayed. The rest of the case is comprised of a generous wooden base (used for storage or simply for design) and the small black MDF kickplate at the bottom.
- Counter Showcase - this showcase is a ‘counter showcase’ in that it is designed to separate the store clerk and the customer. On the clerk’s side are the sliding back panels from which the showcase is accessible, while the viewing area is on the customer’s side.
- ‘Inside Corner’ Showcase - this is a form of the ‘combination’ showcase which is meant to connect with the standard model to create a corner/ angle effect - please refer to the secondary product photo for the diagram. The corner combination models are meant to pair up with two standard showcases, one on either side. There are two slanted sections at 20” in length each designed for pairing up with the 20” depths of the standard cases. When paired with the standard case, the clerk side sliding panels and the storage areas in the wooden base are both still accessible (again, see the diagrams). With the ‘inside corner’ model the corner will be sloping toward the customer (instead of away from the customer - as is the case with the ‘outside corner’ combination showcase) - please refer to the diagram for clarification.
- Dimensions - the jewelry showcase is 38” in height - 12” of glass for showcasing, 22” for the wooden base and 4” for the black kickplate - and 20” deep. We offer three configurations for the ‘inside corner’ combination showcase’s length: 34, 42 and 51 inches. This is the 34 inch model. The wooden storage base on the jewelry display is 22” in height and recessed at only 17.5” in depth.
- Shelving - the jewelry display does not come with any glass shelving for additional rows as it is designed to showcase just a single row or products.
- Options - as with all of our showcases, there are a tremendous amount of options from which to customize this case. All of the basic options are listed above the ‘add to cart’ button and the storage options are explained in a diagram in a secondary product picture. For more customization or for clarification, please do not hesitate to call us.
- Shipping - this showcase is usually ready to ship 2-3 weeks after the order is placed.
There are two types of showcases: the poorer quality ‘knock downs’ and the high quality pre-constructed. These showcases are from the best of the higher quality pre-constructed:
- Highest Quality - this showcase is of the best quality build and materials - if not the best - in the industry. Extreme care and precision is taken in its construction and only the best materials are used. If you plan on your showcase being in top condition several months after purchase - then you would do best to use this model.
- Hand Built in the USA - each one of our display cases are constructed by very skilled craftsmen here in the U.S.
- Damage Resistant - every single one of our showcases is built with a MDF wooden kickplate at the bottom (the black bottom in the picture). While many other manufacturers use the not-so-scratch resistant LDL wood, these showcase are built with the significantly tougher MDF - they are built to last.
- Thick Construction - unlike other showcases constructed with 3/4” aluminum and 3/16” glass panels, these showcases are built with very tough 1” aluminum and 1/4” glass panels.
- Pre-assembled and Pre-tested - no need to worry about confusing assembly instructions or missing parts (a huge issue with ‘knock down’ showcases). These glass showcases are pre-assembled and pre-tested before they leave the warehouse. There will never be missing parts and they will always arrive working.
- Careful Shipping - the pallets are custom built around each showcase for safety and they are shipped by freight with professionals.